Keeping Your Car Battery Clean

Did you ever really have to jump start your car only to realize that the battery was mired in gunk? That nasty gunk is in fact battery oxidation that formed by acid condensation. Fortunately, to get rid of the acid build-up, you just need to apply a basic chemical solution. Something as standard as baking soda might effortlessly clean the battery acid. You need to take some safety measures, but safe cleaning of your battery is only following a few instructions.

Secure Needed Supplies

You will have to first get the supplies you need, most of which can be found in your home. The basic tools you’ll need are a pair of safety glasses to shield your eyes, adjustable pliers and a screwdriver with insulated handles, a stiff bristled brush, and the key component, baking soda. Some other things you need consists of a metal or plastic scraper, box or open-end wrenches, cleaning brushes for the battery terminal, and either a turkey baster or small funnel. It is also necessary to have a pail of water,rubber gloves, spray-on household cleaner and some sponges or clean cloths. It may look like a great deal of stuff to clean the apparatus, but it will keep it safe and non-hazardous.

Observe Safety Procedures

Because the corroding deposits contain sulfuric acid, I suggest you use rubber gloves and the safety glasses. Take care not to get the deposits on the car since it could damage the car’s paint job. Contingent on how corroded the battery happens to be, the amount of cleaning that is needed will be different. It is possible, to get every last bit of dirt and corrosion off of the battery, that the battery will need to be taken out of the vehicle. For this primary cleaning, you work with the scraper and the bristle brush to remove as much of the dirt and corrosion as you can.

Cleaning Basics

The next thing would be to create a mixture of one tablespoon of baking soda to a pint of water, and take the turkey baster, and carefully apply the solution to the outside of the battery, along with the cable connections. Then you’re able to use the bristle brush so that you can loosen and remove the build up from the battery and you want to remove the cables so that cleaning will be easier. You can take away the cables, beginning with negative first then positive, using the pliers and wrenches. For your terminals and any other parts, utilize the brush again to remove the corrosion and do a flush using the baking soda solution.

If perhaps you can still find some dirt and grease left, use the spray household cleaner and sponge to get rid of them. Next, dry all the pieces with a clean cloth and reassemble everything plus be sure that the cable is connected positive first. Make sure things are all secure and you then have a clean, safe battery.